Hallo BASCOM-Gemeinde!
Die neue Version 2.0.3.0 steht zum Download bereit.
Historie von 2.0.3.0:
- mmc-xmega.lib added for using hardware SPI with xmega.
- xmega int() function did not work since it used indirect addressing mode for registers.
- xmega SPI print/input did not use the right counting register, resulting in random read/writes.
- pinout files added
- label and variable names must be unique. this because a function like lookup for example can work with variables as well
previously the variable would be used if both a label and variable existed. now you will get an error and you need to change the name of the label or variable
- updated libusb info in the help
- xmega virtual portmap config
- updated xmega pwm samples and config tcx will set output pin to output in freq/pwm mode when the CCx is enabled
- STK600 PDI programmer did not identified the chip.
- JTAG ICE programming fixed for both USB and COM port. Programmer works only in JTAG mode.
- bit compare bug from 2.0.0.0 fixed
- xm128a3def.dat , tc1 added
- Open File has a sub menu so you can open a file from the samples folder directly.
- bookmark images show larger number for better readability
Kommentare:
Interessant finde ich ja die grün hinterlegte Änderung. Diesen Punkt habe ich vor 2 Jahren mit Mark diskutiert und gefordert. Nun ist es endlich soweit
Wir werden sehen, was die neue Version bringt.
Grüße,
Markus
Die neue Version 2.0.3.0 steht zum Download bereit.
Historie von 2.0.3.0:
- mmc-xmega.lib added for using hardware SPI with xmega.
- xmega int() function did not work since it used indirect addressing mode for registers.
- xmega SPI print/input did not use the right counting register, resulting in random read/writes.
- pinout files added
- label and variable names must be unique. this because a function like lookup for example can work with variables as well
previously the variable would be used if both a label and variable existed. now you will get an error and you need to change the name of the label or variable
- updated libusb info in the help
- xmega virtual portmap config
- updated xmega pwm samples and config tcx will set output pin to output in freq/pwm mode when the CCx is enabled
- STK600 PDI programmer did not identified the chip.
- JTAG ICE programming fixed for both USB and COM port. Programmer works only in JTAG mode.
- bit compare bug from 2.0.0.0 fixed
- xm128a3def.dat , tc1 added
- Open File has a sub menu so you can open a file from the samples folder directly.
- bookmark images show larger number for better readability
Kommentare:
Interessant finde ich ja die grün hinterlegte Änderung. Diesen Punkt habe ich vor 2 Jahren mit Mark diskutiert und gefordert. Nun ist es endlich soweit
Wir werden sehen, was die neue Version bringt.
Grüße,
Markus