Hallo alle zusammen,
ich habe vor fast 10 Tage ein STK500 gekauft und da ich auf mein Laptop kein Serielle Schnittstelle habe habe ich ein Adapter von Conrad gekauft
(http://finder.conrad.de/tipps_tricks2/view/Artikelinfos/elector_usb/usb-adapter.html)
Ich versuche seit fast 3 Tage irgendwas an der Platine was zu machen mindesten die LEd zu leuchten zu bringen aber kein chance .
Die Meldung ist eine ISP Mode Problem:
" A problem occurred when executing the command.Make sure that you are using the corrrect programming method.Current mode is ISP.See the command output for more info.
the troubleshooting section in the help system contain more information on waht may have caused the problem.To open the help system ...
quick Tips:verify that the device is placed in the correct socket and that the ISP
cable is properly connected.Check that the ISP progamming frequency specified on the Main page is well below 1/4 of the clock frequency of the device.Extre precaution should be made when using the CKDIV fuse and /or Clock prescaler Register (CLKPR)on parts supporting this."
Die verbindungen an der platine sind genau wie in der User guide von STK 500 geschrieben PORTD mit Switsches ,PORTB mit LEDS
Ich weiss es auch nicht wie ich dieses Problem lösen kann .
Kann es sein dass an dem Adapter liegen?
Die Meldung kommt egal mit welchem programm "Connect to the selected AVR Prgramm "
Beim Assenblieren lauft alles Okay .
Danke in Voraus
Saif
ich habe vor fast 10 Tage ein STK500 gekauft und da ich auf mein Laptop kein Serielle Schnittstelle habe habe ich ein Adapter von Conrad gekauft
(http://finder.conrad.de/tipps_tricks2/view/Artikelinfos/elector_usb/usb-adapter.html)
Ich versuche seit fast 3 Tage irgendwas an der Platine was zu machen mindesten die LEd zu leuchten zu bringen aber kein chance .
Die Meldung ist eine ISP Mode Problem:
" A problem occurred when executing the command.Make sure that you are using the corrrect programming method.Current mode is ISP.See the command output for more info.
the troubleshooting section in the help system contain more information on waht may have caused the problem.To open the help system ...
quick Tips:verify that the device is placed in the correct socket and that the ISP
cable is properly connected.Check that the ISP progamming frequency specified on the Main page is well below 1/4 of the clock frequency of the device.Extre precaution should be made when using the CKDIV fuse and /or Clock prescaler Register (CLKPR)on parts supporting this."
Die verbindungen an der platine sind genau wie in der User guide von STK 500 geschrieben PORTD mit Switsches ,PORTB mit LEDS
Ich weiss es auch nicht wie ich dieses Problem lösen kann .
Kann es sein dass an dem Adapter liegen?
Die Meldung kommt egal mit welchem programm "Connect to the selected AVR Prgramm "
Beim Assenblieren lauft alles Okay .
Danke in Voraus
Saif