Hallo ich verwende ein STK1000 (AP7),
und upgedates AVR Studio 2.1.0 unter dem Entwickler-image von den AVR
leuten...(von http://www.atmel.no/beta_ware/avr32/AVR32_Linux_BSP_Image_3.0.0.iso)
Ich wollte probehalber ein bsp programm des Software Frameworks
ausprobieren.
File->New Project->STK1000 - DRIVERS - Serial Peripheral Interface (SPI)
example->Prjectname: HelloSPI-> Finish
Bei "Rechtsklick" auf HelloSPI -> Build Project fängt der avr32-gcc an
zu mucken:
./src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x: Assembler messages:
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT0' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT1' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT2' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT3' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
Build error occurred, build is stopped
in der exception.x steht dann ein Makro AVR32_INTC_INT0 bei dem keine
Makro Expansion geht
Hier muss wohl ein header fehlen...
weis wer hier wer weiter?
Hat jemand das gleiche Problem?
und upgedates AVR Studio 2.1.0 unter dem Entwickler-image von den AVR
leuten...(von http://www.atmel.no/beta_ware/avr32/AVR32_Linux_BSP_Image_3.0.0.iso)
Ich wollte probehalber ein bsp programm des Software Frameworks
ausprobieren.
File->New Project->STK1000 - DRIVERS - Serial Peripheral Interface (SPI)
example->Prjectname: HelloSPI-> Finish
Bei "Rechtsklick" auf HelloSPI -> Build Project fängt der avr32-gcc an
zu mucken:
./src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x: Assembler messages:
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT0' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT1' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT2' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_INT3' in operation
../src/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x:229: Error: undefined
symbol `AVR32_INTC_IPR_INTLEVEL_OFFSET' in operation
Build error occurred, build is stopped
in der exception.x steht dann ein Makro AVR32_INTC_INT0 bei dem keine
Makro Expansion geht
Hier muss wohl ein header fehlen...
weis wer hier wer weiter?
Hat jemand das gleiche Problem?